Secure Technology>
Products> Electronic Intrusion Detection Systems>
Electrocoil Systems
Intruder Detection As intruder moves onto the outer coil (earth), it touches the inner
coil (live), which activates an alarm. Or, if the intruder earths the inner live coil, he sets off the alarm.
In addition to the alarm detection system, a high voltage (5-7000 volt) current can be fed into the system, which will give an intruder a nonlethal
repulse shock or a lethal shock. These features can be customized. The outer coil, which is made of barbed tape concertina/razor wire provides a fierce physical deterrent.
This also prevents access to the live inner coil by innocent persons. The high tensile steel wire is virtually impossible to cut with standard tools. Razor sharp blades at close intervals provides an awesome deterrant.
Electrocoil
Industrial, Strategic + Domestic Perimeter Barrier System
Repulse or Lethal Shock
 |
Features
General
The coil is designed to provide an intruder detection signal and, if required, can also provide up to a 7000-volt repulse shock/lethal shock.
Low Cost
A built-in conductor makes the Electrocoil a low cost alarm system.
Simplicity
The coil simply attaches to a fence, wall or roof. Connect an energizer and the user has a physical barrier, detection, and electric repulse system. The coil is particularly suitable for installations with corners and contours, as the live and earth wires follow each other in parallel and do not short circuit.
Innocent Access
As a safety feature, innocent access to the live wire is prevented by the outer coil of barbed tape concertina.
False Alarms Minimized
As the inner coil is attached to the outer coil, the two coils move together in windy conditions, thus avoiding false alarms.
PATENTED
Electrocoil Specifications
Sizes:
Coil type |
730E |
980E |
Diameter (when packed) |
730mm |
980mm |
Stretch distance (approx.) |
11m |
13m |
Inner coil dia. (approx.) |
350mm |
500mm |
Outer Coil: Inner Coil: Insulator tie wire:
Typical Applications
Incorporates a standard coil of barbed tape concertina
manufactured in accordance with USA Mil. Specification: MIL 52489 (CME) June 1980 fully galvanized.
3 mm diameter smooth galvanized wire.
1.6 mm diameter galvanized wire.
|
|
|
|
|
For more information please feel free to contact us, or fill out our literature request form.
