Secure Technology> Products> Electronic Intrusion Detection Systems>
Mobile Map Systems

Alarm Annunciator
Map 3050

• High-accuracy CAD-produced Graphics
• Polycarbonate Nonglare Graphic
• Completely Custom Made According to Client
• Can be used with YCU-1516 Control Unit or Computerized Control Center

Alarm Annunciator Maps (AAM3050) have proven very useful in control rooms and monitoring locations where a large area must be monitored. Typical installations include power plants, refineries, military bases, and correctional facilities. Properly designed AAM3050 systems show all important buildings, partitions, doorways, and gates, as well as the precise locations of alarm devices and zones.

 Custom AAM3050 systems are suitable for wall, console or rack mounting. AAM3050 for console or equipment rack mounting is normally designed to fit and mount within standard 19-inch EIA mounting rails. When provided with a surface-mount enclosure, AAM3050 can also be provided in a custom enclosure designed to integrate with the other control room equipment.

Mobile Map 3010

Mobile Radio Graphic Display System

The Mobile Map 3010 (MM3010) is a state-of-the-art mobile radio graphic display system. The MM3010 can be integrated with a DTR system with or without control units. Alarms received by the MM3010 encoder are checked and formatted into an error-checking frequency-shift-keying (FSK) signal which is sent to the radio transmitter for wireless signalling to the MM3010 Radio Graphic Displays. The radio signal is received no matter the location of the MM3010 display. The alarm information is checked for accuracy and then displayed on the graphic front panel map of the MM3010 display plus an audible warning signal. The audible warning can be silenced using the top-mounted acknowledge switch. However, any new alarm appearing at the mobile map unit will cause the audible alarm to resound.

The MM3010 is continually supervised "in use" for both communications to the central control unit and interference by outside signals. The MM3010 encoder periodically sends a test signal to each MM3010 regardless of whether alarms are present. Each MM3010 display continuously listens for transmissions from the MM3010 transmitter and for unidentified radio signals on the MM3010 radio frequency. Separate front panel lamps indicate loss of communications with the central transmitter and/or the presence of an interference signal. The MM3010 encoder can format and transmit up to 64 independent alarm signals plus an optional security code to each MM3010 mobile radio graphic display.

AAM3050 systems normally consist of a custom-designed graphic faceplate and enclosure. The AAM3050 faceplate consists of a .1875-inch 6061-T1 aluminum substrate with a .020-inch polycarbonate graphic display bonded to the aluminum surface. All lamps and other AAM3050 equipment are mounted to the aluminum substrate. The graphic representation is photographically produced on the reverse (back) side of the polycarbonate sheet on a nonglare, velvet-textured surface. The graphic presentation can be provided in one or more of 11 distinct colors. For example, a typical display will show the fence line and buildings in bright blue, alarm areas and zones in white, and zone nomenclature and wording in red. Accents and special features will be provided in yellow, orange, and green.

Mobile Map 3010
Technical Specifications

Mobile Radio Graphic Display 

Frequency	450-470 MHz
Sensitivity	0.5 uV
Signal-to-Noise Ratio	12 dB SINAD
Signal Decoder	FSK
Circuit Logic	CMOS
Power Supply	12 VDC, 1 amp from vehicle battery
Screen	1/4-inch polycarbonate display
Alarm Lamps	Ultrabrite LEDs
Dimensions	8" x 11" x 3.5", plus sunshield; approx. 3.5 lbs.

 

Radio Transmitter 

Frequency Range	450-470 MHz
Power Output	2 watts into 50 ohms
Signal Input	Current loop from encoder unit
Power Supply	12 VDC, 1 amp plug-in power supply (included)
Enclosure	12" x 12" x 4"

 

Alarm Encoder 

Alarm Inputs	8 per basic unit. Expandable in groups of 8 to a maximum of 64.
Signal Output	2-wire "telephone line" current loop. Transmits up to 3000 feet.
Power Supply	12 VDC, 1 amp provided from wall-mounted plug-in transformer
Enclosure	12" x 12" x 4"; approx. 5 lbs.

Alarm Annunciator Map 3050
Technical Specifications 

Graphic Faceplate	custom made
Enclosure	standard 19-inch EIA mounting rails or custom made
Graphic Presentation	custom made
Voltage	according to client specifications

Specifications subject to change without prior notice.

For more information please feel free to contact us , or fill out our literature request form.